![]() Iptables -t mangle -A POSTROUTING -j TEE -gateway 192.168.1. ![]() Iptables -t mangle -A PREROUTING -j TEE -gateway 192.168.1.120 For example, if the ntop system is at IP 192.168.1.120, you would execute these commands: opkg install iptables-mod-tee They amount to setting the iptables mangle table to mirror packets to ntopng. To mirror packets to the Raspberry Pi, I used these instructions. ![]() We need to mirror all packets to the Pi so that we can see everything happening on the network. You can uninstall or removes an installed ntopng package itself from Ubuntu 17.04 (Zesty Zapus) through the terminal. Nprobe -zmq "tcp://*:5556" -i ethX -n none -b 2īrowse to your Pi at port 3000 to login to ntopng: You should start seeing packet statistics but only for traffic that the Pi can see. Im Betrieb verbraucht Ntopng auf einem Raspberry Pi rund ein Viertel der CPU-Leistung und 60 MByte Arbeitsspeicher. edition of ntopng usable on ARM-based (e.g. Perform the following commands a root on your Raspberry Pi to install ntopng and nprobe apt-key add ntop.keyĮcho "deb armhf/" > /etc/apt//ntop.listĮcho "deb all/" > /etc/apt//ntop.listĪpt-get install ntopng nprobe Test ntopng & nprobeĮxecute the following commands in separate sessions to confirm that everything is working: ntopng -i tcp://127.0.0.1:5556 then start ntopng (flow collector you need to use 1.2.1 or the code. This post documents the process of setting up network traffic monitoring with a Raspberry Pi using ntopng as well as configuring an OpenWRT router to mirror packets to the Pi.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |